How to Fix Linksys Velop Keeps Disconnecting

How to Fix Linksys Velop Keeps Disconnecting?

Linksys Velop is among the best and most efficient mesh Wi-Fi systems. Furthermore, it allows you to enhance the strength of your Wi-Fi signal and stretch it across your entire house. However, Linksys Velop may face certain technical issues sometimes like other networking devices. Also, there’s a possibility that you may face issues like Linksys Velop keeps disconnecting.

So if you’re struggling with the Linksys Velop node keeps going offline, read this blog post very carefully. It’s a comprehensive guide that will teach you about why Linksys Velop keep disconnecting and how to fix it. Thereupon, scroll down the page and go through the entire blog post to gain complete knowledge.

Why Does Linksys Velop Keep Disconnecting?

Although there are numerous reasons why your Linksys Velop keeps disconnecting, this section includes the topmost reasons. So have a look at them and understand why your Linksys Velop node keeps going offline.

  • Damaged/Faulty Wires Between the Devices.
  • Power Socket is Not Working Properly.
  • Outdated Linksys Velop firmware.
  • Too Many Devices are Connected to the Linksys Router.
  • You are using the wrong Wi-Fi channel.

These were some core reasons for your doubt about why Linksys Velop keeps disconnecting. Keep reading this article to acknowledge yourself with the best ways to solve these issues.

Resolving Linksys Velop Node Keeps Going Offline

Being aware of why it happens won’t work alone. If you are thinking about why Linksys Velop keeps disconnecting, then you should also learn the methods to resolve this issue. These resolving methods will help you resolve this issue and allow you to live tension-free. Follow the steps below and you’ll be able to solve the Linksys Velop disconnecting issue on your own.

Replace the Damaged/Faulty Cables

  1. As you read in the previous section, damaged or faulty wires can keep your Linksys Velop node offline.
  2. If this is the same with your wired connections as well, you’ll need to replace the cables to fix this issue.

Check Your Power Socket

  1. If you want to fix Linksys Velop keeps disconnecting, just ensure that it is properly connected to the power socket.
  2. But if the issue persists, then there’s a great possibility that there’s some issue in your power socket.
  3. In such a situation, you will need to repair your power socket.
  4. If required, you may also need to replace the power socket.

Update Your Velop Firmware

  1. Download Velop’s firmware file on your device.
  2. Log into your Velop’s web admin interface.
  3. Click the option of “Connectivity” and click the “Choose File” button.
  4. Then select the firmware file you just downloaded.
  5. Thereon, click the “Start” button.
  6. Finally, click on “Yes” and allow the firmware update to complete.

Reboot Your Linksys Velop

  1. You can reboot your Linksys Velop anytime to get rid of minor bugs & issues.
  2. You can first begin by powering off & unplugging your Linksys Velop.
  3. Then you can switch it’s power to the ‘On’ position again after a few seconds.
  4. Lastly, connect your devices, that support internet connection, back to the Velop’s Wi-Fi network.
  5. Now you should not face the Linksys Velop disconnecting issue.
Fix Linksys Velop Keeps Disconnecting

Decrease the Connected Devices

  1. If your Linksys Velop can handle up to 50 devices at a time, then there’s a possibility that more than 50 devices are connected to it at once.
  2. If this is the case, then it will surely result in your Velop device disconnecting repetitively.
  3. In this scenario, log into your Linksys account and check the number of devices connected to the network.
  4. If you think that you can remove some devices from the network, do it straight away.

Change the Wi-Fi Channel

  1. There are chances that your Linksys Velop is working on the same frequency as compared to other wireless devices.
  2. So change your Velop’s Wi-Fi channel and change it the one that doesn’t overlap with other wireless devices.
  3. As soon as you change the Wi-Fi channel, perform a power cycle on your Wi-Fi devices.
  4. Now check if your Linksys Velop is still dropping the connection or not.

Reset Your Velop Device

  1. If you are thinking about why Linksys Velop keeps disconnecting even till this stage, then consider resetting your Linksys Velop.
  2. Resetting your Linksys Velop will remove all technical bugs & glitches in the Velop.
  3. Before you reset your Velop device, make sure that it is switched in the ‘Power On’ position.
  4. In addition, you also need to ensure that all the nodes are properly connected to it.
  5. While resetting your Velop device, first find the “Reset” button on the backside of your Velop device.
  6. Once you find it, press & hold the Velop’s “Reset” button.
  7. Now release the button once the light in the power LED turns Solid Red and then fades away.
  8. Finally, you have reset your Linksys Velop successfully.
  9. Now it is time for you to re-configure the Linksys Velop’s default settings.

Follow the above troubleshooting methods to fix the issues that are keeping your Linksys Velop node offline. These troubleshooting methods can help you fix the majority of technical bugs & glitches.

Wrapping It Up

Let’s hope that this blog post will act as a comprehensive guide. Moreover, this blog will guide you to fix the issue of Linksys Velop disconnecting again & again. This blog post includes some of the most common issues that may keep your Linksys Velop node offline. In addition to these issues, this blog also teaches the appropriate troubleshooting methods you can follow to solve these issues.

Are you still unable to fix the Linksys Velop disconnecting issue with these troubleshooting methods? Get in touch with our technical staff. Our technical staff will help & guide you in the best possible way.

Frequently Asked Questions

Why Does Linksys Velop Keep Disconnecting?

If your Linksys Velop keeps disconnecting, then a common reason behind this can be a poor Wi-Fi signal. Your Velop’s Wi-Fi signal can be weak as you are sitting far away from the router. Other than this, some Wi-Fi obstructing objects (such as Wi-Fi networks, or other electrical devices) may be causing you to experience signal interference.

Why is My Linksys Velop Node Constantly Going Offline?

If your Velop is going offline, ensure that the nodes & your modem are correctly plugged into the power socket. In addition, check if the power sockets are turned in the “On” position. If everything’s fine, then check if your modem has a stable internet connection.

What Can I Do To Improve the Signal Strength of My Linksys Velop Router?

A common cause of poor signal strength of Linksys Velop router is improper Node placement. Therefore, you should ensure to place the nodes in an open area where the Wi-Fi signals can freely travel without any signal interruption. If you’ve placed a node in the open and the connection is still weak, place it closer to another node.

Where Should I Place the Linksys Velop Nodes?

Usually, you should connect the nodes to your modem and place it in the middle of your house. But if it’s not possible due to any reason, you can place it somewhere near the middle of your house. Experts usually recommend people place 1 or 2 child nodes on every floor.

Recent Posts

Scroll to Top