How to Fix Linksys Velop Not Getting Full Speed?

The Linksys Velop is a renowned Mesh WiFi system known for its high-speed internet connection. This mesh system provides impeccable network coverage with various remarkable features. However, many issues can arise within the Linksys Velop as well. For instance, it’s normal to face the Linksys Velop not getting full speed internet issues.

Such issues within the Linksys Velop can occur due to several reasons. It’s essential to have a high-quality internet connection all the time. So, when your Linksys Velop isn’t working properly, it can be infuriating. Therefore, whenever you face issues with your Linksys velop, you must fix them effectively.

If you are facing the Linksys Velop not getting full speed internet, we’ve got you. We have made this post to help users with this issue. With the help of this blog, you can effectively troubleshoot the issue. We will also discuss the reasons responsible for the issue. Then, we will go over the troubleshooting methods you can use to fix the problem.

Why is the Linksys Velop Not Getting Full Speed?

Before we troubleshoot the issue, we will discuss the reasons for the problem. Knowing the reasons for the issue will help you troubleshoot the issue easily. Some common reasons for the issue are as follows:

Incorrectly placed
Outdated firmware
Improper WiFi settings
System overheating
Too many devices connected
Enabled VPN
Insufficient nodes

These are some common factors responsible for the Linksys Velop not getting full speed issues. We will cover the troubleshooting methods to resolve the issue in the blog ahead.

Troubleshooting the Linksys Velop Not Getting Full Speed Issue

Now that you know the reasons responsible for the issue, you can fix the problems correctly. To make the most of the Linksys Velop, you need to resolve the issues. You can try the following methods to eliminate the issues:

Power Cycle the Linksys Velop

You can also try power cycling the Linksys Velop to fix the issues within the device. The power cycle will eliminate all issues within the mesh system. All you need to do is cut the source of power. After a few minutes, you can power the Linksys Velop back on.

Re-position the Nodes & Velop

The location of the Linksys Velop has a huge impact on the Linksys Velop’s performance. Thus, ensure to place the mesh system and the nodes properly. You need to place the nodes inside the router’s network range. Position the nodes with proper air circulation.

Configure the Settings

The settings of the Linksys Velop also have an impact on it’s functionality. You need to optimize the WiFi channel and frequency settings carefully. For this, you can try different things to find the best combination for your surroundings. Set up a less overcrowded channel for the system.

Turn OFF VPN

When you are streaming online with VPN turned on for a long period of time, it has an effect on the internet. So, while using the internet connection, ensure to turn off the VPN for a seamless streaming option.

Update the Firmware

The outdated firmware of the Linksys Velop is a major cause for the Linksys Velop not getting full speed internet connection. So, be sure to update the firmware whenever a firmware is available. To update the firmware, you need to log into the router’s web interface.

Disconnect Some Devices

The number of devices connected to the mesh system is also another cause for the issue. When a huge number of devices are connected to the Velop for a long time, it deteriorates its performance. So, if possible, disconnect some devices or turn them off for some time.

Add More Nodes

If you are unable to disconnect some devices, you can add more nodes to fix this issue. By adding more nodes, you can distribute the overload and ensure seamless streaming. You can add as many nodes to your mesh WiFi system as you want.

Reset the Linksys Velop

If none of these methods are helpful, you must reset them. The reset will eliminate all glitches and bugs within the device. To reset the Linksys Velop, press the reset button and hold it. When you see a bright red light flash on the Velop and fade with a few pluses, release the button. The reset is successful and all factory default settings should be back.

Final Words

These are some effective methods you can use to fix the Linksys Velop not getting full speed internet connection. The issues within the vacuum should be gone now and the mesh system should be working well now. We hope this blog helped you troubleshoot the problem easily. However, if you require further assistance from our team, you can get in touch with our team right now. We will help you in the best way possible.